Click on image to zoom

Acura Integra 1600cc Fuel Injectors 1986-1991

PB2-1600
These RC Engineering 1600cc Low Resistance Peak and Hold fuel injectors are flow matched and will fit every model, engine, type or style for the following vehicles:

1986-1991 Acura Integra
OBD1 style injector connecting plugs are REQUIRED

Part # PB2-1600

Description

Included: 4 Honda style injectors, spacers and flow sheets. The photo is an example of a similar set.

Notes:
1) You must have your computer setup for low impedance.
2) REQUIRED OBD1 Bosch EV1 center notch style injector clips - additional $19.95.

Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes

Specifications
Flow Rate in CC per minute: 1600CC/min @ 43.5 PSI
Flow Rate in LB per hour: 152LBS/HR @ 43.5 PSI
Resistance: 5.0 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 2.5 Amps / Hold 1.5 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: PB2-1600
Spacers/O-rings Included: Yes
Warranty: 1 year warranty!


Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W5.0000” x H5.0000” x L5.0000”
  • Free Basic Shipping
  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST