Click on image to zoom

VW 1.8L 1200cc Fuel Injectors

PL9-1200
These RC Engineering 1200cc Low Resistance Peak and Hold fuel injectors are flow matched and will fit every model, engine, type or style for the following vehicles:

Many VW models
ALL 1.8T Engines

Part # PL9-1200
Shipping: Free domestic shipping on all RC fuel injectors.
Was: $395.00
Sale: $355.50
Save: 10%
Save: $39.50

Customize Your Item

- Please Select Clips or No Clips -
Qty:
Free Basic Shipping

Description

Included: 4 Bosch style injectors, spacers and flow sheets. The photo is an example of a similar set.

Notes:
1) You must have your computer setup for low impedance.
2) If your vehicle still has the stock OBD2 style injector clips you will need new OBD1 style injector clips which are available - additional $19.95.

Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes

Specifications
Flow Rate in CC per minute: 1200CC/min @ 55 PSI
Flow Rate in CC per minute: 1090CC/min @ 43.5 PSI
Flow Rate in LB per hour: 114LBS/HR @ 55 PSI
Flow Rate in LB per hour: 104LBS/HR @ 43.5 PSI
Resistance: 2.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 4.0 Amps / Hold 1.5 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: PL9-1200
Spacers/O-rings Included: Yes
Warranty: 1 year warranty!


Details

Categories

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W5.0000” x H5.0000” x L5.0000”
  • Free Basic Shipping
  • Free domestic shipping on all RC fuel injectors.

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST