Click on image to zoom
Honda Civic 650cc Fuel Injectors 1992-2000
SL4-650
These RC Engineering 650cc High Resistance, saturated fuel injectors are flow matched and will fit every model, engine, type or style for the following vehicles:
1992-1995 Honda Civic
1996-2000 Honda Civic (OBD1 style clip conversion required, see notes below for details)
Part # SL4-650
1992-1995 Honda Civic
1996-2000 Honda Civic (OBD1 style clip conversion required, see notes below for details)
Part # SL4-650
Shipping: Free domestic shipping on all RC fuel injectors.
Was:
$395.00
Sale:
$355.50
Save:
10%
Save:
$39.50
Description
Included: 4 Honda style injectors, spacers/o-rings, and flow sheets. The photo is an example of a similar set.
Notes:
1) For 1996+ models, OBD1 style injector clips are REQUIRED. If your vehicle still has the stock injector clips and needs OBD1 style injector clips, please select them from the drop down menu above - additional $19.95.
2) Standard spacers included are for B-Series/H-Series engines. If you need D-Series spacers, please select them from the drop down menu above.
Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes
Specifications
Flow Rate in CC per minute: 650CC/min @ 43.5 PSI
Flow Rate in LB per hour: 62LBS/HR @ 43.5 PSI
Resistance: 12.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: SL4-650
Spacers/O-rings Included: YES
Warranty: 1 year warranty!
Notes:
1) For 1996+ models, OBD1 style injector clips are REQUIRED. If your vehicle still has the stock injector clips and needs OBD1 style injector clips, please select them from the drop down menu above - additional $19.95.
2) Standard spacers included are for B-Series/H-Series engines. If you need D-Series spacers, please select them from the drop down menu above.
Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes
Specifications
Flow Rate in CC per minute: 650CC/min @ 43.5 PSI
Flow Rate in LB per hour: 62LBS/HR @ 43.5 PSI
Resistance: 12.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: SL4-650
Spacers/O-rings Included: YES
Warranty: 1 year warranty!
Details
- SL4-650
- SL4-650
- RC Engineering
- New
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- W5.0000” x H5.0000” x L5.0000”
- Free Basic Shipping
- Free domestic shipping on all RC fuel injectors.
May We Suggest
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST
