AFR 185cc Renegade SBF Bare Cylinder Heads, 58cc Chambers, Non-Emissions, No Parts
Note: Head comes completely bare, no parts.
*Notice Pictures are for reference heads would come bare, no parts.
Description
The Ultimate Bolt-On Emission Legal Street/Strip Weapon! - Information below is referring to fully assembled heads.
If you need the world´s finest street/strip small block Ford head, check out AFR´s all new 185cc intake port emissions legal (CARB EO #250-3) performance aluminum cylinder heads. With lightweight 8mm 2.020" intake valves, 1.600" exhaust valves, combustion chamber volumes of 58cc or 72cc, and 70cc exhaust ports, AFR´s new 185cc Ford cylinder heads are designed for 302-351 cid engines operating from 1500 rpm to 6500 rpm. A 3/4" thick head deck makes the AFR head ideal for nitrous or blower applications. Also available with optional nitrous or blower exhaust ports featuring 70cc ultra high flowing exhaust ports. These heads will not accept shaft mount rocker arms. Hardened pushrods required with cylinder heads #1420 and #1422. High flow 2.020 valves might require aftermarket pistons notched for valve clearance.
Note:
Hydraulic roller cams typically experience valve float at 6000-6200 rpm because of their fast ramp rates. AFR suggests you upgrade your springs to AFR part #8019, 1.270 O.D. with higher spring pressures to reduce chances of valve float associated with rpm’s 6200 or higher, but smaller cams with less than .500 lift can rev to 6500 rpm with the included springs.
Note: Stock 86-93 5.0L must have pistons notched for clearance.
| Basic Package Components | Part # |
| 100% CNC Ported Combustion Chambers 100% CNC Ported Exhaust Ports 100% CNC Ported Intake Ports Competition 5-angle Valve Job |
| Specifications, Features, and Optional Supporting Components |
| Head Material |
A356 Aluminum |
| Intake Port Volume | 185cc |
| Intake Port Dimension | 2.045" H x 1.205" W x 3/8 Radius |
|
Intake Port Location
|
Stock |
| Exhaust Port Volume | 70cc |
| Exhaust Port Dimension | 1.355" H x 1.360" W |
| Exhaust Port Location | Stock |
| Combustion Chamber Size | 58cc |
|
Valve Cover Bolt Pattern
|
Perimeter Bolt |
| Valve Angle | 20° |
| Valve Spring Pocket Diameter | 1.460" O.D |
| Max Valve Spring Pocket Machining |
1.625" O.D |
|
Deck Thickness
|
.750" |
| Minimum Bore Diameter | 4.000" |
| Flat Mill | .006" per cc 54cc Max (from 58cc); 68cc Max (from 72cc); |
| Angle Mill | .009" per cc 48cc Max (from 58cc); 62cc Max (from 72cc) |
|
Minimum Cross Sectional Area
|
2.025 sq. in. |
| Note:Angle mills might require a .120" Thick intake gasket. | |
| Spark Plug Dimensions | 14mm x .750" w/Gasket Seat |
|
Carb EO#
|
D-250-3 |
|
Head Bolt Diameter
|
1/2" |
| Intake Port Gasket, Fel-Pro #1262 | AFR #6832 |
| Exhaust Port Gasket, Fel-Pro #1415 | AFR #6837 |
| Head Gasket, 302/351 Windsor, Fel-Pro #1011-1 | AFR #6808 |
| SB Ford 1/2" Bolt Head Bolts, ARP #154-3603 | AFR #6318 |
| SB Ford 1/2" Bolt Head Studs, ARP #254-4503 | AFR #6317 |
| 1/2" Bolt - 7/16" Thread Head Bolts, 289/302W: ARP 254-3708 | AFR #6319 |
| Head Bolt Washers, Manley | AFR #6320 |
| Stud Girdle | AFR #6207 |
| Suggested Manifold | Performer or Performer RPM |
| Spark Plug Starting Range | Autolite 3924 |
Important: Do not port match you intake manifold to any Fel-Pro gasket as it does not precisely match AFR heads.
Note: Milling head deck will affect flow numbers.
Details
- AFR 1385
- AFR 1385
- Air Flow Research
- New
Categories
Shipping Information
- Item Requires Shipping
- 65.0 lbs.
- W12.0000” x H12.0000” x L24.0000”
- Free Basic Shipping
- This item ships in its own box.
- FREE continental USA ground shipping on ALL AFR Cylinder Heads
- TRE Performance Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST