Additional Images

AFR 195cc LT1 / LT4 Eliminator SBC Aluminum Bare Cylinder Heads, No Parts

AFR 1031NP
AFR's LT1/LT4 heads are designed for the Gen II reverse cooled SBC engine from 1992-1996. They feature all the same benefits as AFR's Gen I SBC Heads in addition to dual pattern valve cover mounting holes as standard equipment. Not compatible with self-aligning rocker arms. Chamber size 65cc. Machining options are available to customize AFR Heads to your specific build.

Can be used with both LT1 or LT4 intakes.

Note: Head comes completely bare, no parts.

*Notice Pictures are for reference heads would come bare, no parts.
Shipping: FREE continental USA ground shipping on ALL AFR Cylinder Heads
Was: $2,180.38
Sale: $1,980.38
Save: 9%
Save: $200.00

Customize Your Item

- Mill Options -
Qty:
Free Basic Shipping

Description

The Ultimate Bolt-on Emissions Legal Street Weapon - Information below is referring to fully assembled heads.
The AFR Emissions Legal (ARB only, 49 state legal, not California), 195cc intake port LT1 / LT4 small block Chevy aluminum cylinder heads are available only in an angle plug version. These heads feature a 55cc to 65cc combustion chamber with a 64cc exhaust port and a 3/4" thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm 2.050 intake and 1.600 exhaust with AFR’s hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of 2500 rpm to 6500 rpm (higher rpm ranges possible depending on combination of parts), 23° valve angle, and standard valve spacing make this the perfect street head for 350 cid to 383 cid engines. Designed specifically for 1996 Corvettes or LT4 manifold users. No special parts are required, except for the LT4 intake manifold. Dual valve cover bolt pattern is standard.
The exhaust ports are raised .100" over a standard GM L-98 cylinder head.

Basic Package Components Part #
100% CNC Ported Combustion Chambers
100% CNC Ported Exhaust Ports
100% CNC Ported Intake Ports
Competition 5-angle Valve Job
 

Specifications, Features, and Optional Supporting Components
Head Torque 65-70 ft. lbs
Intake Port Volume
195cc
Intake Port Dimension 2.110" H x 1.265" W 5/16 Radius
Intake Port Location Stock
Exhaust Port Volume 64cc
Exhaust Port Dimension 1.450" H x 1.550" W
Exhaust Port Location .100" Raised
Combustion Chamber Size
55cc or 65cc
Valve Cover Bolt Pattern
Center and Perimeter Bolt
Valve Angle 23°
Valve Spring Pocket Diameter 1.460" O.D
Max Valve Spring Pocket Machining 1.750" O.D
Deck Thickness .750"
Minimum Bore Diameter
4.000" 
Flat Mill .006" per cc 60cc Maximum
Angle Mill .009" per cc 55cc Maximum
Minimum Cross Sectional Area 1.810 sq. in.
Spark Plug Dimensions 14mm x .750" w/Gasket Seat
   
Intake Port Gasket GM #12524653 LT1 / Fel-Pro #1284
Exhaust Port Gasket, Fel-Pro #1404 AFR #6834
Head Gasket, 350cid Fel-Pro #1074
AFR #6803
SB Chevy Head Bolt Kit, ARP #134-3701
AFR #6310
SB Chevy Head Stud Kit, 12 Point Nuts, ARP #234-4301 AFR #6305
Head Bolt Washers, Manley
ARP #234-4301 AFR #6320
Stud Girdle GM L98
Fel-Pro #1074, AFR #6200
Suggested Manifold GM LT1 or LT4
Spark Plug Starting Range
Autolite 3924 
Important: Do not port match you intake manifold to any Fel-Pro gasket as it does not precisely match AFR heads.
Note: Milling head deck will affect flow numbers.
Angle mills might require .120" Thick intake gasket.

Details

Shipping Information

  • Item Requires Shipping
  • 65.0 lbs.
  • W12.0000” x H12.0000” x L24.0000”
  • Free Basic Shipping
  • This item ships in its own box.
  • FREE continental USA ground shipping on ALL AFR Cylinder Heads

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST