Click on image to zoom

Aerospace Ford Old Style Big Bearing Rear Drag Disc Brakes

AC-510
This rear drag race disc brake kit includes Billet Aluminum 4 Piston Calipers, Billet Aluminum Hats, Billet Aluminum Mounting Brackets, Grade 8 Hardware, Hawk Performance Brake Pads, 11 3/8" Diameter 5/16" Thick Drilled Rotors, Drilled for 1/2" Wheel Studs, 4 1/2, 4 3/4, 5" Multi Drilled 5 Lug Patterns. For Drag Race Use Only (Not For Street Use), For Cars Under 3000lbs.
Shipping: FREE continental USA ground shipping on ALL Aerospace Components
Was: $725.00
Sale: $659.00
Save: 9%
Save: $66.00

Qty:
Free Basic Shipping

Description

This kit will drastically reduce the weight of your brakes, but are strictly for drag racing use because the rotors are not vented and will warp under street driving use. If you need brakes for street use, take a look at our Aerospace street brakes for your vehicle. These are the heavy duty brakes which Aerospace recommends for cars weighing 2,600 - 3,000 lbs.

This kit does NOT include vented rotors standard, so you cannot use these brakes for street driving because it will warp the rotors.

For Installation Instructions Click Here!

REQUIRED - Please fill out this form to expedite your order processing and fax to 714-907-0863: Housing End and Axle Offset Guide Click Here!
When Measuring Axle Offset For C-Clip Eliminators Measure From Outside of Axle Flange To Backside Of C-Clip Eliminator Block And Then Add .250" (1/4)

Fits: Big Bearing Ford "Old Style" Housing Ends
Fits: 15" Wheels With a 13.150" Inside Diameter or Larger

Details

Shipping Information

  • Item Requires Shipping
  • 25.0 lbs.
  • W15.0000” x H15.0000” x L15.0000”
  • Free Basic Shipping
  • FREE continental USA ground shipping on ALL Aerospace Components

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST