Additional Images

Accufab 03-04 Mustang Cobra Oval Throttle Body & Polished Power Inlet

CTB2003P
This is the Accufab throttle body and polished air inlet. Dyno testing has shown an increase of 10 horsepower by 2000 RPM, all the way up to 25 horsepower improvement at 6400 RPM. This is rear wheel horsepower. Torque also improved dramatically across the complete power range. The "Big Oval" Throttle Body moves almost 1700 CFM compared to stock 1089 cfm. The new Power Inlet straightens out the airflow, allowing for the major increase in performance. The kit is a direct bolt-on, no modifications are needed. Includes throttle body, blower and IAC gaskets. Also, TPS and IAC screws included.

Description

The Ultimate in Mustang Cobra Throttle Body performance.

Available Versions: Throttle Body only, Throttle Body/Inlet Kit, or Inlet only.

Feel the Power. Replace your Mustang Cobra's restrictive stock throttle body and inlet with this top of the line Throttle Body/Inlet Kit from Accufab and get your DOHC the air it's been lacking. Accufab's throttle body flows 1696 cfm compared to stock 1089 cfm.

Our engineers tested the stock inlet or elbow and noticed that it's design was too restrictive to accept the additional airflow our throttle body moves. Hence, we developed an aftermarket performance inlet which allows the air to flow on a straighter path directly into the intake, accounting for a major increase in performance.

Better Air Flow for More Power. The throttle body and power inlet combination, when dyno tested has shown an increase of 10 horsepower by 2000 RPM, all the way up to 25 horsepower improvement at 6400 RPM. This is rear wheel horsepower. Torque also improved dramatically across the complete power range.

If you have a KenneBell or Whipple supercharger with a mono-blade opening, you should order the throttle body only. We do not recommend trying to use the throttle body only with the stock inlet because of the airflow restrictions explained above. The throttle body has an air passage slot machined within the wall and continuing to the backside of the part for idle air control purposes.

Exceptional Quality. Accufab's quality is second to none - this throttle body is CNC machined from 356 billet aluminum, and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Accufab's power inlet is cast aluminum and CNC machined. It is available either polished or powder coated gray (same finish as OEM)

Application. This Accufab Throttle Body/Inlet Kit is specifically designed as for use on the 2003-2004 Mustang Cobra.

All parts are available separately or sold assembled together as a Kit. Save by purchasing your throttle body, and inlet as a Kit.

Shipping Information

  • Item Requires Shipping
  • 8.0 lbs.
  • W10.0000” x H8.0000” x L5.0000”
  • Free Basic Shipping

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST