Whipple Ford GT Supercar 2005-2006 Intercooled 4.0L Supercharger Upgrade Kit W245AX

There are many options available for Whipple Supercharger kits. If you have any questions please email sales@TREperformance.com or call 760-586-5617.

If your craving more power from your GT Supercar, Whipple has the answer. Get the industries largest, most efficient and latest designed twin-screw supercharger available today. Whipple first brought you the 3.4 Liter W210ax, setting a trend for the ever increasing thirst for more power. After the massive success of the 3.4L, Whipple now offers the W245ax HPR Gen 3 (High Pressure Ratio) which is a whopping 4.0 Liter supercharger! Nearly twice the size of the stock blower and optimized for the higher boost levels the Ford GT motor craves.

The new Whipple system can produce incredible power levels with stock 5.4L GT engines as well as highly modified engines. The revolutionary W245ax HPR compressor has the ability to run nearly 30lbs of boost (engine modifications required) for unheralded performance. This direct bolt-on replacement system gives you the ability to run far higher boost levels than the factory 2.3 liter screw-type supercharger while lowering supercharger air temperatures and power consumption (hp). This bolt-on system comes as a 'tuner' system which gives tuners the ability to run various boost levels and tunes.

Want to run a different boost level? In a matter of minutes, just loosen the 4 bolts, release tension from belt and the SC pulley can be replaced. No need to remove the supercharger for every pulley change as you must with the factory SC. Each kit includes an adjustable idler pulley for extra belt wrap on the sc pulley and extra belt adjustment as well as all the necessary hardware for a very easy bolt-on installation. We also offer a custom-tuned SCT flash tool and Diablo MAFia for direct bolt-on performance for otherwise stock cars.

The Whipple GT kit not only offers a better supercharger, but the potential to have one of the fastest, most powerful street machines on the road today. Each system comes with a high shine polished finish while Whipple offers many custom colors.

DETAILS:
INSTANT BOOST / HORSEPOWER & TORQUE AT ANY RPM
Over 40rwhp gain at stock boost levels due to lower parasitic losses.
Over 100rwhp gain with 15psi and custom tune.
Over 200rwhp gain with 19psi, custom tune, Accufab X-Pipe and cat-back exhaust.
Over 40deg F cooler air at 15psi allows for more spark advance and more power.
W245AX HPR Gen 3 4.0L supercharger head unit, 15 - nearly 30 psi, depending on mods and pulley choice
Massive Air-to-Water Aluminum Bar-plate Intercooler
Fuel Pump Supplied: NONE Supplied
Fuel Injectors Supplied: NONE Supplied
Computer/Ignition Mods.: NONE Supplied
Direct bolt on replacement
The most power per pound of boost on the market!
Easy and quick installation
Lower noise level.
More power, cooler charge air temp, less power consumption/parasitic loss than stock Lysholm 2.3 liter
4.0 liter vs. 2.3 liter stock compressor for more power potential
Up to 95% efficiency.
Boost range 19 - nearly 30 psi with SC pulley changes.
4 bolts to remove SC pulley, no need to pull SC off for pulley.
Included adjustable idler pulley for extra belt adjustment.
Internally lubricated.
Award winning fit and finish
Complete With All Necessary Parts & Hardware For Installation
No Internal Modifications Required

MASS AIR FLOW SENSOR
Factory MAF will peg at 16-17psi depending on environment. Whipple recommends running the Diablo MAFia to extend the MAF sensor range. Custom PCM calibration is required to utilize this piece. You can add the SCT flash tool as well, and combined with the Diablo MAFia you will have everything needed to bolt on and drive!

AIR INLET
The factory rubber air inlet needs to be supported on any boost level over 15psi. When airflow levels go past this, the factory rubber inlet will collapse. Whipple offers a plastic insert that will help support the rubber inlet.

TREperformance is an Authorized Installing Dealer of Whipple Superchargers.
Custom made and shipped direct from Whipple in 5-10 business days!

The Whipple Advantage
The Whipple Advantage is designed into every Whipple SC system. This advantage is broken down into 5 categories during the design and testing phases which truly sets Whipple apart from others:
1. Best power for money.
2. Most complete package.
3. Maximum power.
4. Maximum power expandability.
5. Aesthetic appeal.

What does this mean? You get it all, in one package. Massive power gains with the biggest superchargers, biggest intercoolers, biggest intercooler systems, biggest air-inlet systems while providing robust belt systems and heavy-duty spring tensioners.

You then get OEM style fuel and vacuum hoses with nylon sheaving for added protection and appeal, OEM style quick connects with billet aluminum fittings. No ugly brass fittings hanging off the inlet like some others. Wire extensions are injection molded to allow simple plug-and-play installations. 

Each kit comes with step-by-step instruction manuals printed in color to help all installers, including the do-it-yourselfer. Kits come with all the fasteners, all color matched for proper aesthetic appeal.

So don’t be fooled by others, there is no comparing to the Whipple supercharger systems, simply the top of the line packages designed and built to exceed all expectations.