Additional Images

Holley Sniper EFI Stealth 4500 Self-Tuning Fuel Injection Kit - Classic Gold

550-843
Introducing the Sniper Stealth 4500 EFI System! Wanting to convert your Dragster or Pro-street vehicle to Fuel Injection? Look no further! The Sniper Stealth 4500 EFI system from Holley features 8, 100LB/HR Fuel Injectors capable of supporting 800 to 1500 HP naturally aspirated, or 800-1250 HP on forced induction applications. The Sniper Stealth 4500 also features multiple Input and Output options for sensor inputs and switched outputs to control external relays. This system also comes with a USB to CAN tuning cable and free downloadable Sniper EFI Software give you unlimited control of your engine

Not for use with engines producing less than 800 horsepower
Gasoline Only
Use of leaded race fuels may shorten the service life of the WBO2 sensor
Shipping: FREE Fast Priority Mail shipping to the USA and it's territories on ALL Holley products
Was: $2,389.00
Sale: $2,149.95
Save: 10%
Save: $239.05

Qty:
Free Basic Shipping

Description

Holley Sniper EFI self-tuning fuel injection systems from Holley deliver all the benefits—and none of the hassles. These full-featured throttle bodies are easy to install, can support a lot of horsepower, and will keep your budget intact. They put an end to carburetor cold start issues, hesitations, vapor lock, and flooding. Each of these Holley Sniper EFI systems hit the performance mark with a mounted ECU and an integrated fuel pressure regulator. They're self-learning (no laptop is needed for set up) and they include a small color touchscreen to help you set up and tweak. Holley also provides you with a choice of finishes—satin black or polished aluminum. Make your conversion simple, while getting maximum bang for your buck, with a Holley Sniper EFI self-tuning fuel injection system from Holley.

Upgrade to Sniper EFI and get the tactical accuracy of EFI
today!

Features:
Supports up to 1500 HP Naturally Aspirated or 1250 HP Forced Induction with Eight 100 Lb/Hr Injectors
Compatible with Draw through or Blow through forced induction applications
2.125” Throttle Plates, Flow 1440 CFM for large cubic inch engines
2.5Bar MAP Sensor
Integrated ignition timing control
Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input
Gen 3 Ultra Dominator Style 4 Bolt Air Cleaner Flange
-8AN Fuel Inlets
High Resolution Full Color Touchscreen for Initial Setup, Tuning, and Gauge Displays
Simple Calibration Wizard (Answer a few questions about your engine and it creates the base map, then starts tuning on its own!) - NO laptop required
Self-tuning ECU means you don’t have to be a computer/tuning wiz to have EFI!
The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides realtime Fuel Map Learn
Built-in Single Stage Wet or Dry progressive nitrous control
Three Programmable 0-5V Sensor Inputs for Oil/Fuel/Dome or Nitrous Pressure or other critical information
Six Programmable Ground Outputs, Five programmable ground inputs. These can be used to trigger or control external devices such as nitrous solenoids, boost control solenoids. Or to provide the ECU with an Input to turn on function such as an ignition timi
One +5v Reference Output - +5V Power Supply for 0-5v Sensors, One Sensor Ground – Ground supply for 0-5v Sensors
Throttle body mounted ECU – no extra boxes to mount
Only 4 Wiring Connections Required! (Battery +, Battery - , Switched Ignition & RPM)
Required external fuel pressure regulator, 12-848 is recommended
Customizable secondary fuel pump output (TPS, RPM or Boost enabled)
User friendly Boost Control with handheld adjustability
Free Software included comprehensive datalogging tool to help you maximize the performance of your engine
Real-time datalogging to the included 3.5” Touch Screen, allows you to save information to the SD card without needing a communication cable
Programmable Target Air Fuel Ratios per Boost level
Advanced boost control available via free Sniper EFI tuning software, including Boost vs RPM and Boost vs Time
OEM Style TPS/IAC, for years of dependable service
Included clamp-on oxygen sensor kit ensures a leak free oxygen sensor installation, with Stainless Steel T-Bolt clamps and a Stainless Steel (Weldable) oxygen sensor flange
Patent Pending

Brand Holley Sniper EFI
CFM 1440
Emission Code 3
Finish Classic Gold
Flange Size 4500
Fuel Pressure 58.5 PSI
Height 3.85"
Injector Size 100 lb/hr @ 58.5 PSI
Inlet / Outlet Size 8AN
MAP Sensor 2.5Bar
Max Horsepower Rating 1250 Forced Induction
  1500 Naturally Aspirated
Product Type Sniper EFI Stealth 4500
Throttle Bore 2.125 inch
Part Number 550-843

Emissions 
This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

1965 and older U.S. manufactured California Certified vehicles
1967 and older U.S. manufactured Federally Certified vehicles
1967 and older Foreign manufactured vehicle
Racing Vehicles are vehicles that are used exclusively for racing or other forms of competition that are not registered and that may never be used on the street.

Details

  • 550-843
  • 550-843
  • Holley
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • 9.0 lbs.
  • W11.0000” x H8.0000” x L12.2500”
  • Free Basic Shipping
  • FREE Fast Priority Mail shipping to the USA and it's territories on ALL Holley products

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST