Additional Images

Whipple Ford Mustang GT 5.0L 2011-2014 Gen 5 3.0L Supercharger Intercooled Competition Stage 1 Kit

upgrade to the all new gen 6 blower upgrade
see below for more info!

WK-2610T-STG1-30
This is a Whipple Intercooled Supercharger Stage 1 Competition System with a W185RF 3.0L blower setup for the 2011-2014 Ford Mustang GT 5.0L which will get you 700HP on 93-octane fuel with only 8.5psi of boost! If you want the most advanced, most powerful, most upgradeable and highest quality system available. Featuring the, 5th generation Whipple 3.0L supercharger with an all new rotor profile, new inverted, front feed rotor housing, triple intercooler system is ready to unleash even more power than ever before.

This is the competition kit which will require a custom tune done locally after you install the kit, and does not include a fuel system, programmer, or tuning. Customers who are looking for a full bolt-on kit should look at the complete kits.

Attention: Ready to upgrade your Mustang with the most efficient 3.0L Whipple supercharger, consider upgrading to the all-new Gen 6 blower! This updated version features a revamped rotor package and port design, specifically engineered to lower temperatures and enhance airflow across the entire RPM curve. With these improvements, you can expect an increase of 25-40 HP+ compared to the Gen 5 Blower, at the same boost level on 91 Octane! Keep in mind that Gen 6 Blower upgrades will require 10-12 weeks to be built. See the blue product options button!

Currently not legal in California.

Shipping: FREE continental USA ground shipping on ALL Whipple Supercharger Systems!
Pricing: $7,595.00

Customize Your Item

- Supercharger Finish Options -
- Gen 5 to Gen 6 Blower Upgrade -
- Throttle Body Upgrade -
Qty:
Free Basic Shipping

Description

There are many options available for Whipple Supercharger kits. If you have any questions please email sales@TREperformance.com or call 760-586-5617.

Whipple Superchargers has yet again set a new precedence for bolt-on power and industry leading durability. Whipple's Supercharger system has 3 options, Stage 1, 2 and 3 to better fit each customer's appetite for power! The incredible Stage 1 system boast up to 700HP* on 93-octane fuel with only 8.5psi of boost! That's right, Whipple's Stage 1 is more power than other's Phase 3's! Available for both the manual and auto transmission, the new Whipple system is truly a game changer.

*Results may vary depending conditions, dyno, octane and vehicle modifications. 91 octane will always result in lower power than 93.

DETAILS:
Horsepower: 700+
W185RF 3.0L supercharger head unit, 8.5 psi
Highly effective air-to-water intercooler
Fuel Pump Supplied: NONE Supplied
Fuel Injectors Supplied: NONE Supplied
Computer/Ignition Mods.: NONE Supplied
The most power per pound of boost on the market!
Easy and quick installation
System is 100% complete with OEM quality and appearance
Significantly outflows competitors 1.9L Roots-Type & 2.3L Twin-Screw; Most Efficient Twin-Screw Supercharger On The Market
Complete With All Necessary Parts & Hardware For Installation
No Internal Modifications Required

TREperformance is an Authorized Installing Dealer of Whipple Superchargers.
Custom made and shipped direct from Whipple in 5-10 business days!

Front Inlet vs Rear Inlet
The Whipple front feed system is far superior to other, smaller supercharger rear inlet based SC systems for a very simple reason, less inlet restrictions. The fact is simple, the front entry systems do not require multiple 90deg bends or one sweeping 180deg bend before the SC inlet, which causes unequal rotor filling and lower volumetric efficiency. The new Whipple system only has 1 gradual bend, less than half that of the rear entry style systems.

Rear inlet systems also sacrifice the rear inlet to clear the firewall in most cases, or there’s a big need to slide the SC too far forward, making the discharge pointed up and away from the intercooler core, making the air have to make another turn just to get to the intercooler core. It’s simple, the more work the air has to do, the lower the power gains are going to be.

Fuel System

The Whipple Supercharger Stage 1 SC system features the high flowing Bosch 55 lb/hr fuel injectors from the 13-14 GT500. These EV6 mid length fuel injectors offer dual offset angle spray pattern to allow for excellent idle, cold start and drive-ability, yet enough capacity for the massive power gains. Each system comes with extruded, 6AN billet fuel rails with 1/8" NPT port for fuel psi checking or gauges.

No other fuel system modifications are required.

*Vehicles with 75k mileage should replace the fuel pump and fuel filter due to deterioration. The DW415 fuel pump is a direct replacement and significantly increases flow capacity.

Full System Specifications:
No other upgrades required, just massive power right out of the box
Front entry W185ax (3.0 liters) Whipple twin-screw supercharger that significantly outperforms competitions 1.9L and 2.3L roots-type systems
3.0L 30% larger than 2.3L roots-type
Oversized Crusher™ inlet for maximum airflow capacity and minimal rotor cavitation
Front feed allows for oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more boost and timing to be run on pump gas
Massive air-to-water aluminum bar-plate intercooler offers more cooling than any other positive displacement system available, nothing comes close
Patent pending triple intercooler design for industry leading temperature reduction
Massive intercooler heat exchanger, nearly 150% more volume then some competitors
Industries largest aluminum intercooler reservoir (over 2 gallons) holds more than double any competitors IC water system allowing longer more consistent power
High flow intercooler pump, nearly double the flow of the standard units others use
Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy
Billet fuel rails, hard coat anodizied and laser engraved
58lb/hr Bosch dual pattern fuel injectors vs smaller 47lb/hr injectors for more power
Self-contained oversized oil system for dramatically reduced oil temps in even the most demanding conditions
Exclusive 3x4 rotor combo for significant increase in airflow under the curve than less efficient 4x6 rotor combo or 4x4 roots
More boost at the "hit" than any other twin-screw
Flat torque curve for incredible acceleration
Fits under factory hood with no modifications
No internal modifications required
No grinding of engine block
SCT X4 flash tool included
Completed installation looks factory installed, not some cobbled together kit with multiple billet adapters
Kits come complete with all necessary parts and hardware for installation
Unique oil level sight glass for easy oil level and quality check, no dipstick to bind or misread
Plug and play wiring with male and female connections
Proven 6-rib belt system with heavy duty spring loaded tensioner and adjustable idler system
Optional 10-rib belt system with matching billet pulleys
Stainless steel tapered jack-shaft with unique plastic cover (or optional carbon fiber) for increased safety
OEM quick connect fittings for easy installation, no ugly brass or steel fittings on the SC
Available in wrinkle black, polish, Ford textured blue or any custom color
Easily upgradeable with big cold air intakes and bigger throttle bodies (90mm round or 132mm elliptical)
Instant boost at the touch of the throttle
3 minute pulley changes
Lightweight pocketed SC pulley

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 65.0 lbs.
  • W18.0000” x H18.0000” x L60.0000”
  • Free Basic Shipping
  • This item ships in its own box.
  • FREE continental USA ground shipping on ALL Whipple Supercharger Systems!

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST