Additional Images

Genuine 220lb Siemens Deka IV EV1 Fuel Injectors - 6

Siemens-220LB-EV1-6
This is for six (6) Genuine Siemens Deka IV EV1 220 lb/hr Low Resistance, fuel injectors. These are the newer style skinny injectors, with EV1 electrical connections.

Flow Rate in LB per hour: 220 LBS/HR @ 43.5 PSI
Flow Rate in CC per minute: 2433 CC/min @ 43.5 PSI
Shipping: FREE Fast Priority Mail shipping to the USA and it's territories on ALL Fuel Injectors.
Was: $1,299.99
Sale: $1,159.99
Save: 11%
Save: $140.00

Customize Your Item

- Please Select Clips or No Clips -
Qty:
Free Basic Shipping

Description

Included: (6) Genuine Siemens Deka IV EV1 injectors part number 110333 or FI114212.

These Low Resistance (Approx. 2-3 OHMS) fuel injectors will fit many applications, including, but not limited to:
Audi S4 and A6 6 Cylinder Models
BMW 3, 5, 6, and 7 Series 6 Cylinder Models
BMW L6, L7, M3, M5, X5, Z3 and Z4 6 Cylinder Models
Buick Grand National and T-type
Ford Mustang, Taurus, and Thunderbird V6 Models
Jeep Cherokee, Grand Cherokee, and Wrangler V6 Models
GMC Syclone and Typhoon

Note:
If your vehicle needs OBD1 style injector clips/plugs, please select them from the drop down menu above - additional $29.95.

Specifications
Flow Rate in CC per minute: 2433 CC/min @ 43.5 PSI
Flow Rate in LB per hour: 220 LBS/HR @ 43.5 PSI
Resistance: 2.27 ohms (Low Impedance, Low Resistance)
Voltage: 8-15 Volts, nominal 13.5 Volts
Pressure: Min 30 PSIG/ Max 100 PSIG
O-Rings Included: Yes, on the injectors
Injector Body Design: Metal and composite plastic
Fuel Delivery: Upgraded single fuel delivery nozzle for superior fuel atomization
Offset: 0.64ms
Turn on time: 1.5ms
Turn off time: 1.3ms
Series: DEKA 4 ( DEKA IV )
Electrical connector type: Bosch EV1 (Minitimer, Jetronic)
Spray Pattern: 10-15 Degree Pencil Cone
Orifice Type: Single Orifice
Overall Length: 2 7/8 inches, 74 mm
O-ring to O-ring Length: 2 1/2 inches, 63 mm
Diameter: 16 mm
Orings: Top and bottom, 14.5 mm
Warranty: 1 Year Warranty!

These injectors flow 220 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI! These units are low-impedance and require peak and hold injector drivers or additional resistors for saturation drivers. Despite the low flow rate, they are linear and controllable at low pulse widths compared to other extreme flow injectors! These injectors are sometimes referred to as 212lb/hr or 225lb/hr injectors.

These injectors will allow you to run methanol, ethanol and other flex fuels with fewer injectors for high horsepower applications. Don’t settle for questionable modified low flow injectors when you can have Genuine Siemens quality and performance with these injectors. These injectors are perfectly suited for Extreme horsepower turbo & supercharger applications.

Details

Shipping Information

  • Item Requires Shipping
  • 1.0 lbs.
  • W5.0000” x H5.0000” x L5.0000”
  • Free Basic Shipping
  • FREE Fast Priority Mail shipping to the USA and it's territories on ALL Fuel Injectors.


  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST