Click on image to zoom

Honda Accord 1200cc Fuel Injectors 1990-1995

PL9-1200
These RC Engineering 1200cc Low Resistance Peak and Hold fuel injectors are flow matched and will fit every model, engine, type or style for the following vehicles, but you MUST have your computer setup for low impedance:

1990-1995 Honda Accord

Part # PL9-1200
Shipping: Free domestic shipping on all RC fuel injectors.
Was: $395.00
Sale: $355.50
Save: 10%
Save: $39.50

Customize Your Item

- Please Select Clips or No Clips -
Qty:
Free Basic Shipping

Description

Included: 4 Honda style injectors, spacers/o-rings, and flow sheets. The photo is an example of a similar set.

Notes:
1) You must have your computer setup for low impedance.
2) OBD1 style injector clips are REQUIRED. If your vehicle still has the stock injector clips and needs OBD1 style injector clips, please select them from the drop down menu above - additional $19.95.


Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes


Specifications
Flow Rate in CC per minute: 1200CC/min @ 55 PSI
Flow Rate in CC per minute: 1090CC/min @ 43.5 PSI
Flow Rate in LB per hour: 114LBS/HR @ 55 PSI
Flow Rate in LB per hour: 104LBS/HR @ 43.5 PSI
Resistance: 2.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 4.0 Amps / Hold 1.5 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: PL9-1200
Spacers/O-rings Included: YES
Warranty: 1 year warranty!


Details

Categories

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W5.0000” x H5.0000” x L5.0000”
  • Free Basic Shipping
  • Free domestic shipping on all RC fuel injectors.

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST