CATEGORIES     Contact Info


1725 Monrovia Ave. STE D7

Costa Mesa, CA 92627

P: 877-514-9494

Phone Hours:


10am-6pm PST

    Payment Options


Personal checks will all be accepted after a 10 business day hold.


Sorry no COD's

  • Nov 06 2013

    New High Performance Fuel Injectors!

    We now have a full line of high performance TREperformance Fuel Injectors. We have skinny style EV1 Bosch fitment 19lb, 24lb, 30lb, 36lb, 42lb, 60lb, and 80lb/hr injectors for many applications, including Camaros, Corvettes, Mustangs, etc. We also have Wide Body Bosch style and Wide Body Denso style from 200cc up to 1600cc for high horsepower race cars also. If you do not see what you are looking for on our website, just shoot us an email and we probably have what you need! Thanks, Nick

  • Nov 06 2013

    TREperformance New Store Location

    TREperformance Inc. has moved to a brand new warehouse down the street from our old location. Come on in and checkout the new shop, and don't mind our dog Sparky, he's a Golden Retriever/Chow mix who is friendly as can be once you meet him! The shop is at the very back when you make the turn into the parking lot. If you are in the Huntington Beach/Costa Mesa/Newport Beach area, stop by our new storefront and warehouse location: 1725 Monrovia Ave. Suite D7 Costa Mesa, CA 92627  

    Ford Mustang 5.0 76mm Mass Air Flow Housing 19lb 89-93 - C&L -

Click on image to zoom

Ford Mustang 5.0 76mm Mass Air Flow Housing 19lb 89-93

76mm C&L mass air flow housing for 19lb injectors. We offer both 73mm and 76mm units by themselves, and they both deliver a noticeable improvement in performance on both stock and modified 5.0 Mustang vehicles. The factory 55mm unit on these vehicles flows 550 cfm and is actually 5mm smaller than the stock throttle body. The 73mm unit flows 700 cfm and the 76mm flows nearly 800 cfm, and they are both direct fit replacements for the factory 55mm unit.
Not Available
Was: $169.00
Sale: $152.10
Save: 10%
Save: $16.90


Dyno testing and the major magazines have shown that by replacing the stock unit with one of our 73mm units, you can expect 8 more rear wheel horsepower and as much as 11 additional rear wheel horsepower when installing our 76mm unit. The difference in performance is not primarily due to the increase in airflow, but rather through a slightly more refined calibration. The original 73mm units calibration was developed using flowbench and track test data. When the 76mm unit was developed, we decided to focus our calibration testing on the dyno, and this allowed us to find 2-3 more horsepower by fine-tuning the air/fuel ratio even further. The 73mm unit has been used on vehicles that run low to mid-10's in the quarter mile and generate as much as 600 rear wheel horsepower on the dyno. The 76mm unit will support the airflow needs of a 9 second quarter mile vehicle and will supply air to engines generating up to nearly 800 horsepower.


Shipping Information

  • Item Requires Shipping
  • 5.0 lbs.
  • W5.0000” x H5.0000” x L5.0000”
  • Free Shipping!