Included: 4 injectors. The photo is an example of a similar set.

Specifications
Flow Rate in CC per minute: 550CC/min @ 43.5 PSI
Flow Rate in LB per hour: 52LBS/HR @ 43.5 PSI
Resistance: 12.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: HP630-113-550
Quantity: Set of 4

Venom Hi-Flow Fuel Injectors

Balanced and Matched Sets
Venom fuel injectors are 100% flow tested, balanced and matched to within +/- 1.5% of their nominal flow rate.

Pintle and Pintle Seat
Pintle assemblies are matched and blueprinted to increase flow rate and fuel atomization.

Internal O-Rings
Internal O-rings are manufactured of advanced polyelastamer compound which increases resistance to fuel compound and high heat generated by the increased duty cycle.

Electromagnetic Coils
Molded of aerospace grade material and wound with micro-meter tolerances to decrease activation time at the start of each duty cycle. Encased in Kapton tape and molded to protect against electrical current leaching while under severe load.

Electrical Plug
Solid copper terminals to increase current flow to the electromagnetic coil. Oversized terminals and guide pins for tighter fit and less terminal corrosion.

Filter Basket and External O-Rings
A mesh filter is used to protect against any fuel contaminates. Manufactured of advanced polyelastamer compound which resists against various oils and racing fuels.