Click on image to zoom

RC Fuel Injectors Mazda RX-7 1987-1988 (from late '87) 1600cc

PB2-1600
RC Engineering is the world's leading supplier of made-to-order, high-performance, electronic fuel injectors.

These 1600cc Low Resistance(Approx. 2.5/3 OHMS) Peak and Hold fuel injectors are flow matched and will fit all 87-88 (from late '87) Mazda RX-7s, but you MUST have your computer setup for low impedance (injector clips REQUIRED if you still have stock connectors for an additional $15). Please specify below.

Description

Included: 2 injectors and flow sheets. The photo is an example of a similar set.

Note: If your car still has stock connectors, clips are REQUIRED. Select the 'clips + $15' option from the drop down menu above.

Size Calculation
To determine what size injectors you should use, please visit : RC Engineering's Technical Notes


Specifications
Flow Rate in CC per minute: 1600CC/min @ 43.5 PSI
Flow Rate in LB per hour: 152LBS/HR @ 43.5 PSI
Resistance: 5.0 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 2.5 Amps/ Hold 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Part Number: PB2-1600
Spacers/O-rings Included: YES
Warranty: 1 year warranty!


Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W5.0000” x H5.0000” x L5.0000”
  • Free Basic Shipping

  • Have a question? Ask the Pros
  • 877-514-9494Mon - Fri 8:00 AM - 4:00 PM PST